AMMP Centre

04/05/2026

28 & 29 April 2026

AMMP Centre has joined the 2026 ASEAN MakersFest organized by STEM 4 All Makerspace and Makerspace@UM at Kompleks Perdanasiswa. We focused on displaying a few samples from Wire Arc Additive Manufacturing (WAAM). WAAM is a metal 3D printing technology that uses an electric arc to melt metal wire, building parts layer-by-layer via robotic arms.

AMMP also collaborated with UM Racing Team to exhibit their EV Car that has won two categories in a tournament at Litar Perlumbaan Dato Sagor Perak. The display of the car has attracted visitors, especially students to get a wider explanation about this innovation.

The closing ceremony was officiated by Prof. Dr. Sharifuddin Md Zain who is the Director of Makerspace@UM, and accompanied by Mr. Ramesh Pillai the Director of Programmes, STEM 4 All Makerspace. It was a brief formality for presentation of certificates of appreciation to all participants, and a photo session.

From inspiring innovations to meaningful conversations, the event was a true celebration of creativity, collaboration, and forward-thinking ideas. We’re proud to have been part of such a dynamic platform, connecting with passionate makers, industry leaders, and changemakers.

A big thank you to everyone who made this event a success — the energy, support, and shared vision made it truly unforgettable. Here’s to building, creating, and growing together!

What an incredible experience at ASEAN MakersFest! 🚀

03/05/2026

𝐑𝐞𝐚𝐝𝐲 𝐭𝐨 𝐩𝐮𝐫𝐬𝐮𝐞 𝐚 𝐟𝐮𝐥𝐥𝐲 𝐟𝐮𝐧𝐝𝐞𝐝 𝐌𝐚𝐬𝐭𝐞𝐫’𝐬 𝐚𝐭 𝐌𝐚𝐥𝐚𝐲𝐬𝐢𝐚’𝐬 𝐭𝐨𝐩-𝐫𝐚𝐧𝐤𝐞𝐝 𝐮𝐧𝐢𝐯𝐞𝐫𝐬𝐢𝐭𝐲 (𝐔𝐧𝐢𝐯𝐞𝐫𝐬𝐢𝐭𝐢 𝐌𝐚𝐥𝐚𝐲𝐚, 𝐐𝐒 𝐖𝐨𝐫𝐥𝐝 #𝟓𝟖) 𝐚𝐧𝐝 𝐣𝐨𝐢𝐧 𝐚 𝐝𝐲𝐧𝐚𝐦𝐢𝐜 𝐫𝐞𝐬𝐞𝐚𝐫𝐜𝐡 𝐭𝐞𝐚𝐦 𝐚𝐭 𝐀𝐌𝐌𝐏 𝐂𝐞𝐧𝐭𝐫𝐞?

The Malaysian Technical Cooperation Programme (MTCP) Scholarship is now open for applications from 4 May 2026 until 12 June 2026. This scholarship is sponsored by the Government of Malaysia and is dedicated to outstanding graduates from MTCP recipient countries to pursue full-time Master’s studies in Malaysia for the 2026/2027 academic year.

The MTCP Scholarship supports:

- Full-time Master’s Degree (September/October 2026 intake)
- Duration between 24 to 36 months
- Any mode of study: Coursework, Mixed Mode, or Research

While studying in Malaysia, scholars will gain advanced knowledge and skills that can contribute to the development of their home countries, with opportunities to engage in cutting-edge research at centres such as AMMP.

How to apply:

Visit the MTCP Scholarship website: https://mtcp.kln.gov.my/scholarship

Check your eligibility and the list of MTCP recipient countries.

Submit your application online between 4 May 2026 and 12 June 2026.

If you are keen to join research at AMMP Centre under this scholarship, you are welcome to reach out to discuss potential topics and supervision before applying.

24/04/2026

24 April 2026

AMMP Centre is delighted to welcome Alexandre Duroc from University of Montpellier, France as an intern research assistant under the supervision of Professor Ir. Dr. Farazila binti Yusof.

Alexandre arrived at AMMP Centre on 20th April 2026. He will be with us until around August 2026, and is now stationed at Block C Level 4, Faculty of Engineering.

We look forward to share the learning journey!

11/03/2026

We were pleased to host an initial meeting between AMMP Centre researchers and representatives from The Jungle Coffee, Rene and Yasin, to explore potential avenues for academic-industry collaboration.

The discussion focused on opportunities in processing improvement and automation with AI, areas that hold strong potential for innovation and real-world impact. We were especially inspired by The Jungle Coffee’s social enterprise mission, which strongly aligns with Universiti Malaya’s broader commitment to creating meaningful societal value through knowledge, innovation, and community engagement.

During the session, we shared several possible pathways for industry to collaborate with students and academia, including Industrial Design Projects (IDP), student internships, Final Year Projects (FYP), and engagement through engineering clubs. For larger-scale initiatives, we also discussed the potential for joint funding applications and matching grants to support more strategic and impactful collaborations.

We were also glad to introduce Zecttron Sdn Bhd, University Malaya's spin-off company, which brings expertise in developing customised machines and technology solutions tailored to industry needs.

We look forward to future discussions and the possibility of building a meaningful collaboration that bridges academia, industry, and social impact.

04/03/2026

Universiti Malaya Bright Scholarship 🎓

Looking for an opportunity to pursue your PhD (Research) in advanced manufacturing and materials at Universiti Malaya’s AMMP Centre? This prestigious Universiti Malaya Bright Scholarship is now open to outstanding local and international candidates from leading institutions.

What you will receive:

Full tuition fee waiver for 7 semesters
Monthly stipend of RM3,500 for up to 42 months

If you have a strong research background in areas such as additive manufacturing, welding, materials processing or related fields, we invite you to apply and join our vibrant research community at AMMP Centre.

Apply now at: www.aasd.um.edu.my

23/01/2026

📢 𝐀𝐌𝐌𝐏 𝐂𝐞𝐧𝐭𝐫𝐞 𝐢𝐬 𝐦𝐨𝐯𝐢𝐧𝐠!

After operating from Level 8 of the Engineering Tower (Block L) since 2011, the Centre of Advanced Manufacturing and Materials Processing (AMMP Centre) is pleased to announce our relocation to Level 1, Block Q, Faculty of Engineering, Universiti Malaya.

We are currently in the process of settling in, and our phone lines are temporarily unavailable as they are being transferred to the new location. However, we are reachable at our official email: [email protected]

We look forward to resuming full operations next week from our new home at Block Q, continuing our mission to advance research and innovation in manufacturing and materials processing.

Thank you for your patience and support during this transition!

23/12/2025

𝟐𝟑 𝐃𝐞𝐜𝐞𝐦𝐛𝐞𝐫 𝟐𝟎𝟐𝟓 - Today marks Sri Natchatra's and Khor Sheng Zhong's last day of internships with us, after a meaningful attachment exploring 3D modelling, 3D printing, rapid prototyping, and an early dive into Wire Arc Additive Manufacturing (WAAM).
​
Thank you for your enthusiasm, teamwork and curiosity in advanced manufacturing research. Our team at AMMP wishes you all the best in your future engineering journey!

17/12/2025

𝟏𝟐 𝐃𝐞𝐜𝐞𝐦𝐛𝐞𝐫 𝟐𝟎𝟐𝟓 - AMMP Centre is pleased to welcome Ms. Mechehat Nada Rihane, a PhD student in Mechanical Engineering from the Faculty of Technology, University of Echahid Hama Lakhdar El Oued, Algeria, who is also affiliated with the Arid Zone Renewable Energy Development Unit (UDERZA).​

Her doctoral research focuses on the influence of magnetic fields on the thermomechanical behavior and wear resistance of cutting tools, aligning closely with AMMP’s interests in advanced manufacturing and materials processing.​

Ms. Mechehat arrived in Malaysia on 10 December 2025 and will be attached to AMMP Centre, Universiti Malaya, for one month under a short-term, fully funded internship from her home university.​

During her stay, she will engage with ongoing research activities at AMMP and explore potential collaborative opportunities in machining, tool performance, and advanced manufacturing technologies.

17/12/2025

We invite all to join the 40 mins Webinar tomorrow with Dr Mohd Fadzil on the topic of wire arc additive manufacturing. Thank you Mahsa University for hosting the event.

The Faculty of Engineering and Built Environment, MAHSA University, will host a webinar entitled “Supersized Metal Additive Manufacturing with Wire Arc Technology.”

Discover the future of metal 3D printing with Wire Arc Additive Manufacturing, a revolutionary technology that combines welding and additive manufacturing to efficiently produce large, complex metal parts. This seminar covers the fundamentals and history of WAAM, tracing its evolution from early arc welding innovations to modern Industry 4.0 integration. The seminar also explores WAAM's expanding applications in aerospace, automotive, marine, and medical sectors both within Malaysia and globally. Join us to understand how WAAM is shaping advanced manufacturing and opening new opportunities for Malaysia’s industrial future.

Join us for this insightful session on “Supersized Metal Additive Manufacturing with Wire Arc Technology” with Dr. Mohd Fadzil Jamaludin LIVE on MAHSA University’s page on 18 December 2025 at 10 AM !

11/12/2025

𝟏𝟏 𝐃𝐞𝐜𝐞𝐦𝐛𝐞𝐫 𝟐𝟎𝟐𝟓 - As part of his research attachment wrap-up, Leo Funke from Hochschule Düsseldorf – University of Applied Sciences, Germany, delivered an exit seminar at AMMP Centre presenting his work on advancing an automated methadone dispensing system. Leo demonstrated a secure, web-based database system that enables doctors and pharmacists to log in, prescribe and dispense methadone digitally, with all transactions recorded for traceability and oversight. The dispensing apparatus is built around an ESP32-based control unit linked to a user-friendly GUI, which manages the actual dosing operation while the doctor can issue or adjust prescriptions remotely through the web interface.​

The system is designed to enhance security, accountability and workflow efficiency in methadone dispensing by integrating real-time recording of every dose, user authentication, and centralized data management. Looking ahead, Leo’s next step will be to package the electronics, mechanics and interface into a fully integrated, compact unit, improving robustness and deployment readiness for clinical environments. AMMP Centre expresses appreciation for Leo’s contributions and hopes this project will mark the beginning of continued collaboration between Universiti Malaya and Hochschule Düsseldorf in smart healthcare and automated dispensing technologies.

11/12/2025

𝟏𝟎 𝐃𝐞𝐜𝐞𝐦𝐛𝐞𝐫 𝟐𝟎𝟐𝟓 - AMMP Centre is pleased to welcome two new A-level students from Kolej Yayasan UEM (KYUEM), Sri Natchatra A/P Ananda and Khor Sheng Zhong, who will be spending the next three weeks with us. Both are high-achieving KYUEM students on track to pursue their undergraduate studies in the US or UK. During their time at AMMP Centre, they will be exposed to 3D modelling and design as well as 3D printing, gaining hands-on experience with engineering design workflows and rapid prototyping in a real research environment.​

At the same time, AMMP Centre bids a warm farewell to Leo Funke, from Hochschule Düsseldorf – University of Applied Sciences, Germany, who will be returning home this weekend after completing his month-long internship at the centre. Leo has been part of the team working on the integration of the methadone dispensing system.

AMMP Centre looks forward to seeing Sri, Sheng Zhong and Leo continue their journeys in engineering and to future exchanges with both KYUEM and Hochschule Düsseldorf